{"product_id":"cat-window-hammock-bed","title":"Cat Window Hammock Bed | Heavy-Duty Suction Cups, Steel Wire Frame","description":"\u003ch2\u003eThe Best Seat in the House Was Never Yours.\u003c\/h2\u003e\n\n\u003cp\u003eYour cat already chose the windowsill. They squeeze onto the narrow ledge, half-balanced against the glass, because height plus sunlight plus a view is the only equation that matters to them. The problem is the ledge is too small, too hard, and one stretch away from a fall. This hammock mounts directly to the glass with four industrial-strength suction cups, suspends a breathable Oxford fabric bed on a steel wire frame, and gives your cat a 55 × 35 cm platform to sleep, sunbathe, and watch birds from — no drilling, no floor space lost, no furniture rearranged. It holds up to 15–20 kg, installs in four steps, and the fabric cover slips off for washing.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eWhy This Earned Its Place in the OCPAGA Edit\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eFour industrial-strength suction cups rated for 20–25 kg.\u003c\/strong\u003e Each cup uses a wide-diameter seal that grips any smooth glass surface — windows, sliding doors, glass partitions. Soak them in warm water before installation to soften the PVC and maximise adhesion. Once pressed and left for ten minutes, they lock on and stay on, even when your cat jumps up from below.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSteel twisted wire that won't snap or chew through.\u003c\/strong\u003e The suspension lines connecting the suction cups to the frame are braided steel — not cord, not rope, not plastic cable. They resist biting, clawing, and the repeated stress of a cat launching onto the hammock day after day. The wire is rated to outlast every other component.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eReinforced frame with centre support tubes.\u003c\/strong\u003e The perimeter frame assembles from lightweight tubing, and two centre support tubes run across the width to prevent the fabric from sagging in the middle. The result is a taut, flat sleeping surface that holds its shape under weight instead of collapsing into a bowl.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHigh-density Oxford fabric that breathes and cleans easily.\u003c\/strong\u003e The bed surface is made from dense-weave Oxford cloth — the same material used in outdoor gear. It is breathable enough to keep your cat cool in direct sunlight, tough enough to resist claw punctures, and removable for machine washing or a quick wipe-down.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNo drilling, no tools, no permanent marks.\u003c\/strong\u003e The entire unit mounts with suction cups only. No screws in the window frame, no brackets on the wall, no adhesive residue. Move it to a different window in minutes, or remove it entirely and the glass looks untouched.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSpace-saving design for apartments and small homes.\u003c\/strong\u003e The hammock sits flush against the glass and occupies zero floor space. It folds flat when not in use and stores behind a door or under a bed. For homes where every square metre counts, this is a full-size cat bed that takes up none of it.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eHow to Install — 4 Steps\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eStep 1:\u003c\/strong\u003e Assemble the perimeter frame by connecting the tubing sections and inserting the two centre support tubes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 2:\u003c\/strong\u003e Slip the fabric cover over the assembled frame.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 3:\u003c\/strong\u003e Thread the steel wire through the holes in the fabric cover and connect to the frame.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 4:\u003c\/strong\u003e Soak the suction cups in warm water to soften, wipe the glass surface clean with a damp cloth, press each cup firmly to expel all air, and wait 10 minutes before allowing your cat on. For maximum hold, clean the glass with a wet wipe first and ensure the surface is completely dry.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eWill a suction cup cat hammock hold a large or heavy cat?\u003c\/strong\u003e\u003cbr\u003e\nThe four suction cups are collectively rated for 20–25 kg on clean, smooth glass. The hammock frame and steel wire support a working load of 15–20 kg, which comfortably holds one large cat or two smaller cats at the same time. For best results, clean the glass thoroughly before installation and re-press the suction cups every few weeks to maintain seal integrity.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan a cat window hammock damage or mark the glass?\u003c\/strong\u003e\u003cbr\u003e\nNo. The suction cups use vacuum pressure only — no adhesive, no screws, no brackets. When removed, they leave no residue and no marks on the glass. The steel wire rests against the glass surface but does not scratch it under normal use.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow do I stop the suction cups from falling off?\u003c\/strong\u003e\u003cbr\u003e\nSuction cup failure is almost always caused by dirty glass, dry cups, or air trapped during installation. Before mounting, soak the cups in warm water for two to three minutes to soften the PVC. Wipe the glass with a damp cloth and dry it completely. Press each cup firmly from the centre outward to push all air out. Wait a full ten minutes before use. Re-press the cups every two to three weeks to refresh the seal.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBed Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e55 × 35 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstalled Height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e~67 cm (suction cups to hammock surface)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBed Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh-density Oxford cloth (breathable, claw-resistant)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrame\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLightweight tubing with 2 centre support tubes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSuspension\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBraided steel twisted wire (bite-resistant)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 × industrial-strength PVC suction cups\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSuction Cup Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20–25 kg (on clean, smooth glass)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWorking Load\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15–20 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSuction cup only — no drilling, no tools\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColourways\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDune · Cloud · Sky Wash · Lavender · Blush · Midnight\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 × frame with steel wire, 2 × centre support tubes, 1 × fabric cover, 4 × suction cups\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSurface Compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSmooth glass windows, sliding doors, glass partitions\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCare\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRemove fabric cover and machine wash or wipe clean; re-press suction cups every 2–3 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003chr\u003e\n\n\u003cp\u003e\u003cem\u003eMeets the OCPAGA Standard for problem-solving, convenience, and time-saving.\u003c\/em\u003e\u003c\/p\u003e\n","brand":"Hypersku","offers":[{"title":"Cloud","offer_id":51133127295264,"sku":"600649401200054","price":38.0,"currency_code":"AUD","in_stock":true},{"title":"Midnight","offer_id":51133127328032,"sku":"300649401300030","price":38.0,"currency_code":"AUD","in_stock":true},{"title":"Lavender","offer_id":51133127360800,"sku":"300649401200078","price":38.0,"currency_code":"AUD","in_stock":true},{"title":"White","offer_id":51133127393568,"sku":"300649401100026","price":38.0,"currency_code":"AUD","in_stock":true},{"title":"Sky Wash","offer_id":51133127426336,"sku":"100649401400044","price":38.0,"currency_code":"AUD","in_stock":true},{"title":"Dune","offer_id":51133127459104,"sku":"700649401600014","price":38.0,"currency_code":"AUD","in_stock":true},{"title":"Blush","offer_id":51133127491872,"sku":"600649401700060","price":38.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/0935\/7344\/files\/Sun_Bed_1.png?v=1770346124","url":"https:\/\/ocpaga.com\/products\/cat-window-hammock-bed","provider":"OCPAGA","version":"1.0","type":"link"}